MORC MC50 Series Non-explosion 3/2 kapa 5/2 Solenoid 1/8″~1/
Litšobotsi
■ Mofuta o sebetsang ka sefofane, oo hangata o koetsoeng ke khetho ea kamehla.
■ Sliding spool valve e nang le tiiso e ntle le karabelo e potlakileng.
■ Khatello e tlase ea ho qala, nako e telele ea bophelo.
■ Ho ngola ka letsoho.
■ Ho hloella ka ho toba ho pneumatic actuator kapa khokahanyo ea li-tubing.
Tekheniki Parameters
| Boholo ba Boema-kepe | 1/8" | 1/4" | 3/8" | 1/2" | |
| Palo ea li-volts | 12/24/48VDC;110/220/240VAC | ||||
| Mofuta oa ts'ebetso | Khoeli e le 'ngoe, khoele e habeli | ||||
| Tšebeliso ea Matla | 220VAC:5.5VA;24VDC:3W | ||||
| Sehlopha sa insulation | Sehlopha sa F | ||||
| Mokhoa oa ho sebetsa | Moea o hloekileng (kamora ho sefa 40μm) | ||||
| Khatello ea moea | 0.15 ~ 0.8MPa | ||||
| Khokahano ea boema-kepe | Sehokelo sa DIN | ||||
| Ambient Temp. | Mocheso o tlwaelehileng. | -20 ~ 70 ℃ | |||
| Mocheso o phahameng. | -20 ~ 120 ℃ | ||||
| Tšireletso ea ho kena | IP65 | ||||
| Ho kenya | Namur kapaTubing | ||||
| Sebaka sa karolo/Cv | 14mm2/0.78 | 25mm2/1.4 | 30mm2/1.68 | 50mm2/2.79 | |
| Lintho tse bonahalang tsa 'mele | Aluminium | ||||
Ke hobane'ng ha u re khetha?
Ho hlahisa lihlahisoa tsa rona tsa morao-rao tse etselitsoeng ho fana ka taolo e nepahetseng le e sebetsang ea ho tima li-valve tsa pneumatic.Li-valve tsa rona tsa pneumatic solenoid li entsoe ka likarolo tse tsoetseng pele le likarolo tse etsang hore e be khetho ea ho qetela bakeng sa indasteri leha e le efe e hlokang valve e tšepahalang le e phahameng ea ts'ebetso.
Letoto lena la li-valve tsa pneumatic solenoid tse tsamaisoang ke sefofane li na le mohaho o nepahetseng o tataisoang ke sefofane ho netefatsa ts'ebetso e nepahetseng le liphello tse tsitsitseng.Ho feta moo, li na le moaho oa mofuta oa spool o fanang ka tiiso e ntle haholo le karabelo bakeng sa ts'ebetso e boreleli le e tšepahalang.
Li-valve tsa rona tsa pneumatic solenoid li boetse li entsoe ka ts'ebetso ea khatello e tlase ea khatello, e netefatsang ts'ebetso e boreleli le e tšepahalang ea valve esita le tlas'a maemo a tlase a khatello.Sena se etsa hore e be tse loketseng bakeng sa lits'ebetso tse hlokang taolo ea motlakase o tlase.
Li-valve tsa rona li boetse li etselitsoe bophelo bo bolelele, ho netefatsa hore li tšoarella le ho tšepahala le tlas'a maemo a thata ka ho fetisisa.Sena se fetolela litšenyehelo tse fokotsehileng tsa nako le tlhokomelo, tse u lumellang ho tsepamisa maikutlo khoebong ea hau ea mantlha.
Bakeng sa boiketlo bo eketsehileng, li-valve tsa rona tsa pneumatic solenoid tse tsamaisoang ke mofofisi li na le lisebelisoa tse ngotsoeng ka letsoho bakeng sa ts'ebetso ea matsoho ha ho hlokahala.Sena se etsa bonnete ba hore esita le haeba ho na le matla a ho hlōleha, u ntse u ka sebelisa valve ea hau habonolo.
Li-valve tsa rona li boetse li entsoe ho nahanoa ka ho kenngoa ho kopantsoeng.Li na le sistimi e kentsoeng e kopanyang ka mokhoa o ts'oanelang ho sistimi ea hau e teng, e u bolokela sebaka sa bohlokoa sa ho kenya le ho fokotsa litšenyehelo tsohle tsa ho kenya.
Ka kakaretso, li-valve tsa rona tsa pneumatic solenoid li fana ka ts'ebetso e ke keng ea lekanngoa, e ts'epahalang le e bonolo.Hore na o ntse o ntlafatsa sistimi e teng kapa o qala morero o mocha, li-valve tsa rona ke khetho e ntle ka ho fetisisa bakeng sa litlhoko tsa hau.Ka likarolo tse tsoetseng pele tse kang kaho e tsamaisoang ke mofofisi, kaho ea li-valve tsa spool, ts'ebetso ea khatello e tlaase, bophelo bo bolelele, ho feta ka letsoho le ho kenya letsoho, u ka etsa bonnete ba hore u fumana ts'ebetso e ntle ka ho fetisisa ho tloha valve ea hau.Ikopanye le rona kajeno bakeng sa tlhaiso-leseling e batsi.
Lihlopha tsa lihlahisoa
-
MORC MC-40/ MC-41 Series Lock-up Valve
-
Lebokose la ho fetola moeli oa MLS100 Series
-
MORC MC50 Series Intrinsically Sireletsehile Solenoid 1/...
-
Letoto la 'MAPSSpring Acting/Double Acting Stainles...
-
MORC MPP-12 letoto la Linear/Rotary Pneumatic-pneu...
-
MORC MC50 Series Non-explosion 5/3 Solenoid 1/8...
